Description of 2.8 inch TFT LCD display
TST28QV02A is 2.8 inch tft lcd display with ILI9341 driver IC, it's TN display with 12 o'clock viewing angle, means the best viewing is from 12 o'clock direction, typical brightness is 275 cd/m2, if you need higher brightness, we could also customize the backlight or change the LEDs to meet your needs. This 2.8 inch tft lcd display is with MCU interface, we have the ability to make the customization of FPC to change the interface as you need, like RGB, SPI interface etc. Standard & Customized touch screen is available to make. If you have any further interests, please check below more information and contact us to get more details.
Specification of 2.8 inch TFT LCD display
| LCD type | 2.8 inch tft lcd display |
| Part No. | TST28QV02A |
| Resolution | 240xRGBx320 |
| Outline dimension | 50x69.2x2.38mm |
| Active Area | 43.2x57.6mm |
| Brightness | 275 cd/m2 |
| Interface | MCU 8/16 bits |
| Viewing angle | 12 o'clock |
| Operating temperature | -20℃ to +70℃ |
| Storage temperature | -30℃ to +80℃ |
Feature of 2.8 inch TFT LCD display
1) Backlight: white 4 LEDs, 40mA
2) High range of temperatur range
3) Support MCU Interface
4) High-speed response, Low power consumption
5) Panel Type: TFT
6) Surface Treatment: Haze 25%, 3H
7) Competitive prices, offer 1 year of warranty;
8) Original technology support.
9) Reach,ROHS certification
Application of 2.8 inch TFT LCD display
Our 2.8 inch tft lcd display is widely using in industrial, medical, communication, PDA&Table, Smart home, Automotive applications and many other fields. Our display rang from 0.96 inch to 21.5 inch, also manufacturing touch screen and monochrome LCD display. Our products are widely selling to all over the world.
TEAM SOURCE DISPLAY is available to provide full ranges of LCD display from 0.96 inch to 21.5 inch, as well as this 2.8 inch tft lcd display, also have the ability to provide all kinds of standard capacitive touch panel and make the customization of various capacitive touch panel basing on customers' requirement.
1. We provide customer service through Skype, phone or email, supply you video or drawing to solve problems.
2. We provide remote control service through internet to achieve real time service, which will short time of solving problems.
3. We have professional engineer customer to keep fastly reply.
Q: What's the difference between IPS and TN display?
1. Different viewing angles
Due to the manufacturing principle of the TN display, the viewing angle cannot be rotated too much when viewing, otherwise the content on the screen will not be seen. The film compensation film technology can be used to increase the viewing angle to 170°.
The ips display does not have these restrictions, and the content on the screen can be perfectly seen at an angle of 178°
2. Different color gamut
The TN display is a 6Bit native panel, which can only display 64 colors of red, green, and blue. The maximum actual color is only 262,144. It can be increased to more than 16 million colors through the "dithering" technology, but the final color display number is obtained. The highest is only 16.2 million colors.
The ips screen can display more colors, and its color accuracy is better than the TN display.
3. Different response speed
The grayscale response time of the TN display is longer, which will cause the dynamic image displayed on the screen to leave an afterimage, which will have a certain impact on the user.
IPS hard screen technology changes the arrangement of liquid crystal molecules, and adopts horizontal conversion technology to make the liquid crystal screen respond faster and more stable, and can perform excellent dynamic high-definition pictures. Compared with tn screens, it is more suitable for moving image reproduction. No afterimages and smearing.
Q: Do you accept sample order or small quantity order?
A: Yes, you can place sample orders for testing first, and small quantity order as pilot production.
Q: What are the payment terms?
A: We usually accept T/T, Paypal, other terms to be negotiated.
Q: What’s the lead time?
A: Usually 3~5 days for sample orders if goods are in stock, and 4~5 weeks for mass production (basing on the quantity and product)
