800x480 resolution 5 inch ips lcd panel support SPI interface
Description Of 5 inch LCD Panel
TST050WVHS-89 is 5 inch ips lcd panel, normally it's much common for RGB interface, but this 5 inch lcd panel support SPI interface. It's intregated with LT7680 IC, available to add the flash, only need some simple intruction and then customer could light up the display very easily. The performance is just similar as RA8875.
Team Source Display is ISO9001, ISO14001, ISO13485, IATF16949 certificated LCD manufacturer. Our lcd display is widely using for Industry, Medical, Automotive and Smart products. Any further interests, please contact our sales for more details.
Specification Of 5 inch LCD Panel
LCD type | 5 inch LCD panel |
Part No. | TST050WVHS-89 |
Resolution | 800xRGBx480 |
Outline dimension | 120.70x75.80x2.9mm |
Active Area | 108.00x64.80mm |
Brightness | 500 cd/m2 |
Interface | SPI |
Viewing Direction | All o'clock |
Operating temperature | -20℃ to +70℃ |
Storage temperature | -30℃ to +80℃ |
Feature Of 5 inch LCD Panel
Intregated with LT7680 IC, it has capability to receive external reset(RST#) event to synchronize with external system. The external reset event will be admitted when RST# keep low and stable at least 256 OSC clocks.
Before the start to access LT768x, Host should check it‟s Status Register(STSR) bit [1], i.e. operation mode status bit, and make sure it‟s in “Normal operation state”.
Supply Voltage (Analog) |
VDD~GND |
-0.3 |
4.0 |
V |
Logic signal voltage(I/O) |
IOVDD~GND |
-0.3 |
4.0 |
V |
Operating Temperature |
TOP |
-20 |
70 |
℃ |
Storage Temperature |
TST |
-30 |
80 |
℃ |
Humidity |
RH |
- |
90%(Max 60℃) |
RH |
Household Appliances: refrigerator, air conditioner, induction cooker, microwave ovens
Instruments: clinical thermometer, wire tester, digital watches, electronic weight scale
Medical Devices: sphygmomanometer
Sports Equipment: running machine
Industrial Control Equipment: remote control, punched-card machine
Information Terminal Display: POS
Security Products: elevator controller, electronic indicator
Advantage Of our LCD Panel
More than 18 years experience,strong background in TFT and P-cap design.
Faster Support in Front and After-sales service. Support customer from the products' design to the final products.
Local sales and engineer team support in European for good communication.
Follow a people-oriented, quality and customer-first approach in all of our dealings, fast developing together with customers.Follow a people-oriented, quality and customer-first approach in all of our dealings, fast developing together with customers.
We have our own capacititve touch panel workshop, can make design and production of different CTP designs
1. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.
- Be sure to ground the body when handling the LCD modules.
- Tools required for assembling, such as soldering irons, must be properly grounded.
- To reduce the amount of static electricity generated, do not conduct assembling and other work
under dry conditions.
- The TFT LCD module is coated with a film to protect the display surface. Exercise care when peeling
off this protective film since static electricity may be generated.
2. Do not alter, modify or change the the shape of the tab on the metal frame.
3. Do not make extra holes on the printed circuit board, modify its shape or change the positions of
components to be attached.
4. Do not damage or modify the pattern writing on the printed circuit board.
5. Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector
6. Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
7. Do not drop, bend or twist TFT LCD Module.