This display module is a transmissive type color active matrix TFT(Thin Film Transistor)
liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This module is composed of a TFT LCD module, a driver circuit, and a back-light unit.The resolution of a 0.96” contains 80(RGB)X160 dots and can display up to 65k colors.
|LCD type||α-Si TFT|
|Display Mode||IPS / Transmissive / Normally Black|
|Resolution||80RGB x 160|
|Module Outline||13.54(H) ×27.948(V)×1.5(T)|
|Active Area||10.80 (H)×21.70(V)|
Backlight recommended circuit
Motherboard driver backlight is need constant current circuit, if the rated voltage screen after
light brightness difference.Current and power consumption of the machine are inconsistent, so
recommend a backlight driving circuit is best rated current.It is recommended to use IC (AW9364).
Precautions and Warranty
14.1.1 The liquid crystal in the LCD is poisonous. Do not put it in your mouth. If the liquid
crystal touches your skin or clothes, wash it off immediately using soap and water.
14.1.2 Since the liquid crystal cells are made of glass, do not apply strong impact on them.
Handle with care.
14.2.1 Reverse and use within ratings in order to keep performance and prevent damage.
14.2.2 Do not wipe the polarizer with dry cloth, as it might cause scratch. If the surface of the
Team Source Display LCM Specifications(TST09602A)LCD needs to be cleaned, wipe it swiftly with cotton or other soft cloth soaked with petroleum IPA,
do not use other chemicals.
14.3.1 Do not drive LCD with DC voltage
14.3.2 Response time will increase below lower temperature
14.3.3 Display may change color with different temperature
14.3.4 Mechanical disturbance during operation, such as pressing on the display area, may
cause the segments to appear “fractured”.
14.4 Static Electricity
14.4.1 CMOS LSIs are equipped in this unit, so care must be taken to avoid the electro-static
charge, by ground human body, etc.
14.4.2 The normal static prevention measures should be observed for work clothes and
14.4.3 The module should be kept into anti-static bags or other containers resistant to static for
14.5 Limited Warranty
14.5.1 Unless otherwise agreed between and customer , will replace or repair any
of its LCD and LCM which found to be defective electrically and visually when inspected
in accordance with Quality Standards, for a period of one year from date of shipment.
14.5.2 The warranty liability of is limited to repair and/or replacement. will not be
responsible for any consequential loss.
14.5.3 If possible, we suggest you use up all modules in six months. If the module storage time
over twelve months, we suggest that recheck it before the module be used.
Touch panel, LCD, Backlight, FPC
TSD is the professional LCD factory. Providing the TFT display, size range is 0.96-32 inch. And the touch screen including the capacitive & resistive touch panel. Also we have the ability the support provide the mono LCD, customized solution is available.
What TSD has?
Size:Our standard TFT LCD display size range from 0.96 inch to 13.3 inch,
including 0.96”, 1.44", 1.77", 2", 2.2'', 2.4", 2.8",3.2", 3.5", 4.3", 5", 5.5”, 7", 8", 10.1", 13.3”.
Brightness: can be designed per customer's requirements
Polarizer: TV, EWV, Ofilm
Connection: All kinds of FPC design supported
2)CTP CAPACITIVE TOUCH PANEL
Structure: G+G, G+F, G+F+F
Cover Lens: Glass (AR, AF, AG coating can be added), PMMA etc.
Driver: FT, GT, Atmel, ILITEK, ST, EETI etc.
Have standard one and also available to make the customization with different size, shape, color, logo etc.
3) Passive LCD
Mode: TN, HTN, STN, FSTN, DFSTN, VA
Structure: LCD Panel, COB, COG
Connection: Zebra,Pin, FPC, Rubber
Backlight: All kinds of design
Q: How can i find the right product?
A: Please send us your requirements, we will recommend our standard products, if it’s not fit, we will do the necessary adjustment & customization.
Q: How to customize the product?
A: Customized procedures goes like this: Project scope clarification → Fill TSD Requirement Form → Engineering analysis → Cost→Evaluation → Customer confirmation → Providing drawing → Customer confirmation → Sampling → Customer approval → Mass production
Q: Do you accept sample order or small quantity order?
A: Yes, you can place sample orders for testing first, and small quantity order as pilot production (no less than MOQ)
Q: What are the payment terms?
A: We usually accept T/T, Paypal, other terms to be negotiated.
Q: What’s the lead time?
A: Usually 3~5 days for sample orders if goods are in stock, and 4~5 weeks for mass production (basing on the quantity and product)