Product Description
Product Description
Team Source Display model TST050WVHI-13C-O is a color active matrix thin film
transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a
switching device. This model is composed of a TFT LCD panel, a driving circuit, a
backlight system and a touch panel. This TFT LCD has a 5.0 (16:9) inch diagonally
measured active display area with WVGA (800 horizontal by 480 vertical pixel)
Product parameters
| Outline Dimension | 140.7x 93.83 x 4.4 (Typ.) |
| Display area | 108.0(H) x 64.8(V) |
| Number of Pixel | 800 RGB (H) x 480(V) |
| Pixel pitch | 0.135(H) x 0.135(V) |
| Pixel arrangement | RGB Vertical stripe |
| Display mode | Normally white |
|
Surface Treatmen Dirver Element |
Antiglare a-Si TFT |
| LED | 18 |
Features
■ 5.0 (16:9 diagonal) inch configuration
■ 8 bits +FRC driver with 1 channel TTL interface
■ ROHS and Halogen-Free Compliance
Applications
■ Personal Navigation Device
■ Multimedia applications and Others AV system
Product structure
Gallery
Custom Service
Touch panel, LCD, Backlight, FPC
Company Profile
TSD is the professional LCD factory. Providing the TFT display, size range is 0.96-32 inch. And the touch screen including the capacitive & resistive touch panel. Also we have the ability the support provide the mono LCD, customized solution is available.
Our advantages
l 18 Years LCD module experience
l Flexible delivery & cost-effective
l Stable quality
l Professional team
l OEM service
GENERAL PRECAUTION
1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise
catastrophic.
2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. XUTONG does not warrant the module, if customers disassemble or modify the module.
3 Breakage of LCD Panel
1.1 .If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do notcontact liquid crystal with skin.
1.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
1.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
1.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.
1.5 Electric Shock
4.1. Disconnect power supply before handling LCD module.
4.2. Do not pull or fold the LED cable.
4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector or cables in order to prevent electric shock
5 Absolute Maximum Ratings and Power Protection Circuit
5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
5.3. It’s recommended to employ protection circuit for power supply.
6 Operation
6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD
