Panel size: 6.2 inch
Display format: Graphics 640 (w) x 320 (h) dots
Dot pitch: 0.21875 (w) x 0.21875 (h) mm
Active area: 140.0 (w) x 70.0 (h) mm
General dimensions: 160.0 (w) x 109.0 (h) x 4.6 (t) mm
Color pixel arrangement: Mono stripe
Display mode: Normal black VA
Driving method: TFT active matrix
Viewing direction: Wide view
LCD controller / driver: ST7511 or equivalent
Interface: LCD controller / driver – Parallel 6800 / 8080, 4-line serial, 3-line serial
|Panel size||6.2 inch|
|Display format||Graphics 640 (w) x 320 (h) dots|
|Dot pitch||0.21875 (w) x 0.21875 (h) mm|
|Active area||140.0 (w) x 70.0 (h) mm|
|General dimensions||160.0 (w) x 109.0 (h) x 4.6 (t) mm|
|Color pixel arrangement||Mono stripe|
|Display mode||Normal black VA|
|Driving method||TFT active matrix|
|Viewing direction||Wide view|
|LCD controller / driver||ST7511 or equivalent|
|Interface||LCD controller / driver – Parallel 6800 / 8080, 4-line serial, 3-line serial|
Touch panel, LCD, Backlight, FPC
TSD is the professional LCD factory. Providing the TFT display, size range is 0.96-32 inch. And the touch screen including the capacitive & resistive touch panel. Also we have the ability the support provide the mono LCD, customized solution is available.
l 18 Years LCD module experience
l Flexible delivery & cost-effective
l Stable quality
l Professional team
l OEM service
What TSD has?
Size:Our standard TFT LCD display size range from 0.96 inch to 13.3 inch,
including 0.96”, 1.44", 1.77", 2", 2.2'', 2.4", 2.8",3.2", 3.5", 4.3", 5", 5.5”, 7", 8", 10.1", 13.3”.
Brightness: can be designed per customer's requirements
Polarizer: TV, EWV, Ofilm
Connection: All kinds of FPC design supported
2)CTP CAPACITIVE TOUCH PANEL
Structure: G+G, G+F, G+F+F
Cover Lens: Glass (AR, AF, AG coating can be added), PMMA etc.
Driver: FT, GT, Atmel, ILITEK, ST, EETI etc.
Have standard one and also available to make the customization with different size, shape, color, logo etc.
3) Passive LCD
Mode: TN, HTN, STN, FSTN, DFSTN, VA
Structure: LCD Panel, COB, COG
Connection: Zebra,Pin, FPC, Rubber
Backlight: All kinds of design
TSD Touch Panel Solution
1. Customized CTP
Slide, roll, Single-touch, multi-touch, In cell,on cell,G+G,G+F,GGG industry or automotive CTP solution with OCA, OCR optical bonding
2. Customized RTP
Anti static,Anti Dust,water proof
High temperature and humidity
4line and 5lines RTP
3. Cover lens
Customized Color with Silk print, logo printing
Any Irregular Shape
0.55mm, 0.7mm,1.1mm,1.8mm,2.0mm,2.8mm,3mm, 4mm
Q: How can i find the right product?
A: Please send us your requirements, we will recommend our standard products, if it’s not fit, we will do the necessary adjustment & customization.
Q: How to customize the product?
A: Customized procedures goes like this: Project scope clarification → Fill TSD Requirement Form → Engineering analysis → Cost→Evaluation → Customer confirmation → Providing drawing → Customer confirmation → Sampling → Customer approval → Mass production
Q: Do you accept sample order or small quantity order?
A: Yes, you can place sample orders for testing first, and small quantity order as pilot production (no less than MOQ)
Q: What are the payment terms?
A: We usually accept T/T, Paypal, other terms to be negotiated.
Q: What’s the lead time?
A: Usually 3~5 days for sample orders if goods are in stock, and 4~5 weeks for mass production (basing on the quantity and product)
Precaution for using LCM
1. Liquid Crystal Display (LCD)
LCD is made up of glass, organic sealant, organic fluid and polymer based polarizers. The following precautions should be taken when handling.
a) Keep the temperature within the range of use and storage. Excessive temperature and humidity could cause polarization degredation, polarizer
peel off or bubble.
b) Do not contact the exposed polarizer with anything harder than HB pencil lead. To clean dust off the display surface, wipe gently with cotton, chamois or other soft material soaked in petroleum benzin.
c) Wipe off saliva or water drops immediately. Contact with water over a long period of time may cause polarizer deformation or colour fading, while an active LCD with water condensation on its surface will cause corrosion of ITO electrodes.
d) Glass can be easily chipped or cracked from rough handling, especially at corners and edges.
e) Do not drive LCD with DC voltage.
2. Liquid Crystal Display Modules.
2.1 Mechanical Considerations
LCM are assembled and adjusted with a high degree of precision. Avoid excessive shocks and do not make any alterations or modification. The following should be noted.
a) Do not tamper in any way with the tabs on the metal frame.
b) Do not modify the PCB by drilling extra holes, changing its outline, moving its component or modifying its pattern.
c) Do not touch the elastomer connector, especially insert a backlight panel (for example, EL)
d) When mounting a LCM make sure that the PCB is not under any stress such as bending or twisting. Elastomer contacts are very delicate and missing pixels
could result from slight dislocation of any of the elements
e) Avoid pressing on the metal bezel, otherwise the elastomer connector
could be deformed and lose contact, resulting in missing pixels.
2.2 Static Electricity
LCM contains CMOS LSI’s and the same precaution for such devices should apply, namely
a) The operator should be grounded whenever he/she comes into contact with the module. Never touch any of the conductive parts such as the LSI pads, the copper leads on the PCB and the interface terminals with any parts of the human body.
b) The modules should be kept in antistatic bags or other containers to static for storage.
c) Only properly grounded soldering irons should be used.
d) If an electric screwdriver is used, it should be well grounded and shielded from commutator spark.
e) The normal static prevention measures should be observed for work clothes and working benches, the latter conductive (rubber) mat is recommended.
f) Since dry air is inductive to statics, a relative humidity of 50-60% is recommended.
a) Solder only to the I/O terminals.
b) Use only soldering irons with proper grounding and no leakage.
c) Soldering temperature: 280 °C
d) Soldering time: 3 to 4 sec
e) Use eutectic solder with resin flux fill.
f) If flux is used, the LCD surface should be covered to avoid flux spatters. Flux residue should be removed afterwards.
a) The contras can be adjusted by varying the LCD driving voltage V0
b) Driving voltage should be kept within specified range, excess voltage shortens display life.
c) Response time increases with decrease in temperature.
d) Display may turn black or dark blue at temperature above its operational range, this is (however not pressing on the viewing area) may cause the segments to appear “fractured”.
e) Mechanical disturbance during operation ( such as pressing on the viewing area) may cause the segments to appear “fractured”.
If any fluid leaks out of the damage glass cell, wash off any human part that comes into contact with soap and water. Never swallow the fluid. The toxicity is extremely low but caution should be exercised at all the time.