TEAM SOURCE DISPLAY’s Module: TST080HH002-01 is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT LCD panel, a drive IC, a FPC, and a WLED-backlight unit.The active display area is 8.0 inches diagonally measured and the native resolution is 1024*RGB*600. Features of this product are listed in the following table.
|LCD Mode||a-Si TFT/transmissive|
|Outline Dimension||192.8(W) *116.9H) *4.2(T)|
|Active Area(A.A)||176.64*(W) *99.36(H)|
|Viewing Direction||12 O’clock|
|Display Mode||Normally WHITE|
|Storage Temperature||-30~70 ℃|
Touch panel, LCD, Backlight, FPC
TSD is the professional LCD factory. Providing the TFT display, size range is 0.96-32 inch. And the touch screen including the capacitive & resistive touch panel. Also we have the ability the support provide the mono LCD, customized solution is available.
l 18 Years LCD module experience
l Flexible delivery & cost-effective
l Stable quality
l Professional team
l OEM service
What TSD has?
Size:Our standard TFT LCD display size range from 0.96 inch to 13.3 inch,
including 0.96”, 1.44", 1.77", 2", 2.2'', 2.4", 2.8",3.2", 3.5", 4.3", 5", 5.5”, 7", 8", 10.1", 13.3”.
Brightness: can be designed per customer's requirements
Polarizer: TV, EWV, Ofilm
Connection: All kinds of FPC design supported
2)CTP CAPACITIVE TOUCH PANEL
Structure: G+G, G+F, G+F+F
Cover Lens: Glass (AR, AF, AG coating can be added), PMMA etc.
Driver: FT, GT, Atmel, ILITEK, ST, EETI etc.
Have standard one and also available to make the customization with different size, shape, color, logo etc.
3) Passive LCD
Mode: TN, HTN, STN, FSTN, DFSTN, VA
Structure: LCD Panel, COB, COG
Connection: Zebra,Pin, FPC, Rubber
Backlight: All kinds of design
TSD Touch Panel Solution
1. Customized CTP
Slide, roll, Single-touch, multi-touch, In cell,on cell,G+G,G+F,GGG industry or automotive CTP solution with OCA, OCR optical bonding
2. Customized RTP
Anti static,Anti Dust,water proof
High temperature and humidity
4line and 5lines RTP
3. Cover lens
Customized Color with Silk print, logo printing
Any Irregular Shape
0.55mm, 0.7mm,1.1mm,1.8mm,2.0mm,2.8mm,3mm, 4mm
Q: How can i find the right product?
A: Please send us your requirements, we will recommend our standard products, if it’s not fit, we will do the necessary adjustment & customization.
Q: How to customize the product?
A: Customized procedures goes like this: Project scope clarification → Fill TSD Requirement Form → Engineering analysis → Cost→Evaluation → Customer confirmation → Providing drawing → Customer confirmation → Sampling → Customer approval → Mass production
Q: Do you accept sample order or small quantity order?
A: Yes, you can place sample orders for testing first, and small quantity order as pilot production (no less than MOQ)
Q: What are the payment terms?
A: We usually accept T/T, Paypal, other terms to be negotiated.
Q: What’s the lead time?
A: Usually 3~5 days for sample orders if goods are in stock, and 4~5 weeks for mass production (basing on the quantity and product)
The liquid crystal in the LCD is poisonous. Keep away from your mouth and eyes. If the liquid crystal
contacts with your skin, mouse or clothes, use soap to wash it off immediately.
i. The LCD panel is made by thin glass. Prevent the panel from mechanical shock or putting excessive force
on its surface.
ii. The polarizer attached on the display is very easy to be damaged, handle it with special attention.
iii. To avoid contamination on the display surface, do not touch the display surface with bare hands.
iv. The transparent electrodes may be disconnected if you use the LCD panel under dew-condensing
v. The characteristics of the semiconductor devices may be affected when they are exposed to light, possibly
resulting in malfunctioning of the ICs. To prevent such malfunctioning of the ICs, make sure the application
and the mounting of the panel are designed so that the IC is not exposed to light.
3 Static Electricity
Ground soldering iron tips, tools and testers when you operate. Also ground your body when handling the
products and store the products in an anti-electrostatic container.
Store the products in a dark place where the temperature is within the range of 25±10 and with low humidity
(65%RH or less). Do not store the LCD product in an atmosphere containing organic solvents or corrosive
Do not wipe the polarizer with dry cloth, as it might cause scratching. Wipe the polarizer with a soft cloth
soaked with petroleum IPA. Other chemical might damage the panel.