Description Of 15 inch IPS LCD Module
TST150XGCI-L01 is a 15.0” TFT Liquid Crystal Display module with LED backlight units and 20pins LVDS interface. This module supports 1024 x 768 XGA mode and can display 16.7M/262k colors. The PSWG is to establish a set of displays with standard mechanical dimensions and select electrical interface requirements for an industry standard 15.0” XGA LCD panel and the LED driving device for Backlight is built in PCBA. This 15 inch IPS LCD Module is with wide temperature range which is suitable for automotive markets.
Specification Of 15 inch IPS LCD Module
|
LCD type |
IPS LCD Module |
|
Part No. |
TST150XGCI-L01 |
|
Resolution |
1024xRGBx768 |
|
Outline dimension |
326.50x253.50x9.1mm |
|
Active Area |
304.1 x 228.1mm |
|
Brightness |
500 cd/m2 |
|
Interface |
LVDS |
|
Viewing angle |
All o'clock |
|
Operating temperature |
-30℃ to +0℃ |
|
Storage temperature |
-40℃ to +80℃ |
Feature Of 15 inch IPS LCD Module
A. Size: 15.6 inch
B. Display mode: Normally black, transmissive mode
C. XGA (1024 x 768 pixels) resolution
D. DE (Data Enable) only mode
E. VDS Interface with 1 pixel/clock
F. PSWG (Panel Standardization Working Group)
G. Wide operating temperature.
H. RoHS compliance
Advantage Of 15 inch IPS LCD Module
1. Factory Direct Sales
We can promise the quality ourselves and the price is absolutely advantage.
2. Professional Technical Support
Our technical team can solve the problems encountered in the use process for you.
3. Support OEM/ODM Customization
We can Personalized customization for customers
4. Professional Sales Team
Our sales team will provide you with one-to-one service and solve all your after-sales problems.
5. To Be Your Reliable LCD Supplier in China
We're ISO13485 and IATF16949 Certified LCD manufacturer. In addition to our standard products, we could one-stop service and help you to customize all kinds of products basing on your requirements.
FAQ Of our 15 inch IPS LCD Module
How to assembly and handling precautions?
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is very soft and easily scratched.
(5) If the surface of the polarizer is dity, please clean it by some absorbent cotton or soft cloth. Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, EthyI acid or Methyl chloride. It might permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.
(8) Protect the module from static electrcity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the lamp wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
