TST030VGGP-02 is a 480XRGBX640 dot-matrix TFT module. This module has a 3.0inch diagonally .Each pixel is divided into Red, Green and Blue sub-pixels and dots that are arranged in vertical stripes. LCD color is determined with Dithering 16.7M Color signal for each pixel. It is intended to support applications where thin thickness, wide viewing angle, low power are critical factors and graphic displays are important.
|Display Mode||Transmissive and Normally Black type|
|Display Format||RGB Stripe|
|Input Data||RGB data bus, 24-bit parallel data ,DE MODE|
|Viewing Direction||Wide View|
|Number of DOT||480(W)×640(H)|
|LCD A.A||45(W)×60 (L)|
|Pixel Pitch||0.09375 (W)× 0.09375(L)|
Touch panel, LCD, Backlight, FPC
TSD is the professional LCD factory. Providing the TFT display, size range is 0.96-32 inch. And the touch screen including the capacitive & resistive touch panel. Also we have the ability the support provide the mono LCD, customized solution is available.
l 18 Years LCD module experience
l Flexible delivery & cost-effective
l Stable quality
l Professional team
l OEM service
What TSD has?
Size:Our standard TFT LCD display size range from 0.96 inch to 13.3 inch,
including 0.96”, 1.44", 1.77", 2", 2.2'', 2.4", 2.8",3.2", 3.5", 4.3", 5", 5.5”, 7", 8", 10.1", 13.3”.
Brightness: can be designed per customer's requirements
Polarizer: TV, EWV, Ofilm
Connection: All kinds of FPC design supported
2)CTP CAPACITIVE TOUCH PANEL
Structure: G+G, G+F, G+F+F
Cover Lens: Glass (AR, AF, AG coating can be added), PMMA etc.
Driver: FT, GT, Atmel, ILITEK, ST, EETI etc.
Have standard one and also available to make the customization with different size, shape, color, logo etc.
3) Passive LCD
Mode: TN, HTN, STN, FSTN, DFSTN, VA
Structure: LCD Panel, COB, COG
Connection: Zebra,Pin, FPC, Rubber
Backlight: All kinds of design
TSD Touch Panel Solution
1. Customized CTP
Slide, roll, Single-touch, multi-touch, In cell,on cell,G+G,G+F,GGG industry or automotive CTP solution with OCA, OCR optical bonding
2. Customized RTP
Anti static,Anti Dust,water proof
High temperature and humidity
4line and 5lines RTP
3. Cover lens
Customized Color with Silk print, logo printing
Any Irregular Shape
0.55mm, 0.7mm,1.1mm,1.8mm,2.0mm,2.8mm,3mm, 4mm
Q: How can i find the right product?
A: Please send us your requirements, we will recommend our standard products, if it’s not fit, we will do the necessary adjustment & customization.
Q: How to customize the product?
A: Customized procedures goes like this: Project scope clarification → Fill TSD Requirement Form → Engineering analysis → Cost→Evaluation → Customer confirmation → Providing drawing → Customer confirmation → Sampling → Customer approval → Mass production
Q: Do you accept sample order or small quantity order?
A: Yes, you can place sample orders for testing first, and small quantity order as pilot production (no less than MOQ)
Q: What are the payment terms?
A: We usually accept T/T, Paypal, other terms to be negotiated.
Q: What’s the lead time?
A: Usually 3~5 days for sample orders if goods are in stock, and 4~5 weeks for mass production (basing on the quantity and product)
PRECAUTIONS FOR USE
(1) Do not swallow any liquid crystal, even if there is no proof that liquid crystal is poisonous.
(2) If the LCD panel breaks, be careful not to get liquid crystal to touch your skin.
(3) If skin is exposed to liquid crystal, wash the area thoroughly with alcohol or soap.
2 STORAGE CONDITIONS
(1) Store the panel or module in a dark place where the temperature is 23±5°C and the humidity is below 45±20%RH.
(2) Store in anti-static electricity container.
(3) Store in clean environment, free from dust, active gas, and solvent.
(4) Do not place the module near organics solvents or corrosive gases.
(5) Do not crush, shake, or jolt the module.
3 HANDLING PRECAUTIONS
(1) Avoid static electricity, which can damage the CMOS LSI.
(2) The polarizin plate of the display is very fragile. so, please handle if very carefully.
(3) Do not give external shock.
(4) Do not apply excessive force on the surface.
(5) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate.
(6) Do not use ketonics solvent & Aromatic solvent, use with a soft cloth soaked with a cleaning naphtha solvent.
(7) Do not operate it above the absolute maximum rating.
(8) Do not remove the panel or frame from the module.
The period is within twelve months since the date of shipping out under normal using and storage conditions.