EN
TSD 0.96'' 0.96 inch 80*160 res. tft lcd display SPI/MCU/MIPI interface lcd module with touch panel
|
Item
|
0.96 inch TFT LCD display
|
|
Model name
|
TST09607A |
|
Display Mode
|
Normally White,Transmissive
|
|
Resolution
|
80*160
|
|
Technology Type
|
a-Si TFT active matrix
|
|
Driver IC
|
ST7735S
|
|
Pixel Configuration
|
R.G.B. Vertical Stripe
|
|
Outline Dimension
|
13.30x27.94x1.40
|
|
Active Area(mm)
|
10.8x21.70
|
|
Interface
|
SPI
|
|
Viewing Direction
|
ALL
|
|
Surface treatment:
|
Anti-Glare
|
|
Backlight Type
|
1-LED white color
|
|
Operating Temperature
|
-20~70°C
|
|
Storage Temperature
|
-30~+80°C
|
Brand:
TSD
Spu:
TST09607A
Appurtenance:
- Overview
- Related Products
Products Description
Item |
0.96 inch TFT LCD display |
Model name |
TST09607A |
Display Mode |
Normally White,Transmissive |
Resolution |
80*160 |
Technology Type |
a-Si TFT active matrix |
Driver IC |
ST7735S |
Pixel Configuration |
R.G.B. Vertical Stripe |
Outline Dimension |
13.30x27.94x1.40 |
Active Area(mm) |
10.8x21.70 |
Interface |
SPI |
Viewing Direction |
ALL |
Surface treatment: |
Anti-Glare |
Backlight Type |
1-LED white color |
Operating Temperature |
-20~70°C |
Storage Temperature |
-30~+80°C |
General Characteristics
| ITEM | Specification | Unit |
| LCD Type | a-Si TFT,Transmissive,Normally Black | - |
| LCD Size | 0.96 | inch |
| Resolution (W x H) | 80x (RGB) x 160 | pixel |
| LCM (W x H x D ) | 14.04 x 27.95 x 1.71 | mm |
| Active Area (W x H) | 10.8 x 21.7 | mm |
| Dot Pitch (W x H) | 0.135 x 0.1356 | mm |
| Viewing Direction | All o'clock | - |
| Color Depth | 65K/262K | - |
| Pixel Arrangement | RGB Vertical stripe | - |
| Backlight Type | 1 LED,20mA , 3.2V | - |
| Surface Luminance | 400±50 | cd/m2 |
| Surface Treatment | Clear | - |
| Driver IC | ST7735S | - |
| Interface Type | 4 wire SPI | - |
| Input Voltage | 2.8 (Typ) | V |
| With/Without TP | without | - |
| Weight | TBD. | g |
Interface Description
| PIN NO. | Symbol | Description |
|---|---|---|
| 1 | TP0 | No connect |
| 2 | TP1 | No connect |
| 3 | SDA | the serial data input/output signal |
| 4 | SCL | the serial clock input signal |
| 5 | RS | Data/Command Selection pin |
| 6 | RES | Reset input signal active low |
| 7 | CS | Chip select signal Low Enable |
| 8 | GND | System Ground. (0V) |
| 9 | NC | |
| 10 | VCC | Power supply +2.8V |
| 11 | LEDK | Backlight K Cathode input pin. |
| 12 | LEDA | Backlight A Anode input pin. |
| 13 | GND | System Ground. (0V) |
Have any customize requirements, please feel free to Contact Us.
TSD-Provide Best Products with Best Services.
